Installing of wall fountains at your residence is much simpler than you believe it is. They in fact bring a touch of class and a stunning improvement to your decoration. Firstly you have to choose a spot in which you want the wall fountain to be situated. Ensure the stability of the wall so that it will never destroy or collapse. Look for an outlet to see if there is a spot to plug the water fountain. If you buy a fountain make sure that everything is found in the box and all the pieces. Confirm if the wall surface has a holding mechanism as well as measure the wall first. Bigger wall fountains may only be mounted by the group instead of you mounting it yourself. You also need to look for the proper wall stud.

Many of the wall fountains are weighty therefore you must not cling them directly on a sheet rock. The fountains that are made up of rock and slate are the heaviest ones. Water fountains that weigh above thirty pounds must be placed with brackets. While the lighter models can be installed with a picture hanging set. Just for security you have to hang the wall fountain in a manner that the electrical outlet and also the power cord are hidden behind the water fountain. Hang the fountain in a place so that it is not always being bumped by who ever passing by.

You require a wireless drill to screw in the bracket and a level device in order to install the water fountain perfectly. A tape measure, pencil and several screws will also be needed. To begin with mark the spot in which you are going to place the water fountain. Make sure that it’s installed in which it will fit the decoration and someplace higher. You should also find out how tall and wide the water fountain is before installing it on the wall. Place all the pieces which will fit easily and quickly together.

The next step for the wall fountains is to install the bracket and mark the spots where the screws will be placed. Once you have installed the bracket, then you lift the rock and connect it to the bracket. After the stone is connected to the bracket then connect the bottom plate which will hold the water. Fill the reservoir at the bottom with water and make use of distilled water that is free from solids and microorganisms. This filtered water helps mineral deposits from forming in the water. Refill the water inside the fountain often as it should be refilled once per week. There must not be excessive water in the wall fountain or else it may splash and end up wetting the furniture. As insufficient water could also be a problem, which may leave spots on the pump motor.

Once it’s filled with water the wall fountain is ready to start. Make sure that the parts are installed successfully. You can also add pebbles to the base container and adore the charm of your wall fountain. Those wall fountains make a unique dramatic statement wherever they are placed and are easy to maintain.

Stone water fountains balance water and are designed to fulfill both your useful and aesthetic purposes. Outdoor fountains and ponds provide the advantages of having a meditation area without taking up massive square footage in this era of constant urban sprawl.