Caring For Your Decorated Tabletop Tree, Holiday Accent Tree & Japanese Holly

Unpacking and Setting Up Your Tree: Stand the box upright, grab the pot by the rim, and pull the tree, along with the cardboard packaging, out of the box. Remove and discard the cardboard packaging. Choose a location for your tree that is away from heat sources such as wood stoves and radiators.

Caring during the Holidays: Your tree is a young evergreen that is alive and healthy. It is shipped in a dormant state and therefore requires little attention during the holidays, apart from occasional watering. We recommend placing it in a cool room (where the temperature does not rise much above 65°F) and checking the soil mix frequently with your finger. If the mix feels dry 1/2” below the surface, water thoroughly. Do not allow the pot to sit in water inside the plastic-lined basket. The best way to water is to lift the pot from the basket, water the tree at the sink, then return it to the basket after the excess water has drained away. Avoid watering the battery pack if you received a tree decorated with a string of lights. Because it is dormant, your tree should not be fertilized. For the Stars of Wonder Tabletop Tree, spritz the Air Plants lightly 2 or 3 times with a plant mister once a week.

Please note: Our slow-growing trees are best treated as seasonal plants and discarded after the holidays. However, with some care they can be maintained over the winter and planted out in spring in their hardiness zones. The dwarf Alberta Spruce is hardy in Zones 3-7, the Holiday Accent Tree in Zones 5-6, and the Japanese Holly in Zones 6-9. If you live in these zones, you can move the tree to a place where it will receive bright light but no direct sun and the temperatures are between 35-50°F, continue watering as above, and plant it outside in the spring as soon as the soil can be worked. Choose a site in full sun with average, well-drained soil. Dig a hole deep enough to accommodate the roots, then turn the pot upside down and tap the bottom to remove the tree. Place your tree in the hole so the top of the root ball is level with the soil line and fill in around the roots with soil. Press the soil to firm and water thoroughly.