QuestionHi Jim,
I've had this controller . When I set the controller to manual I could turn on all the stations and run manually. When I change it to automatic, station 2C doesn't work, I could hear the pump running and station 2C display on the controller but no water comes out. i have tried resetting the controller but with no luck. Any ideas?
Cheers,
Ben
AnswerHey Ben, it is probably not the controller, but your #2 valve. It probably either needs a new solenoid, or a new diaphragm installed. Go to www.irrigationtutorials.com, and this website will explain how to rebuild your valve. Good luck and have a great day.