An Irritrol Rain Dial RD1200 runs on automatic, but semi‑auto start, manual start, and +/- buttons (held down) fail. All buttons worked for years; other functions are fine.
Remove battery, disconnect power for one minute, restore power without battery. Test buttons. If they still fail, the button contacts are worn. Replace the front panel or the entire controller.
Find a Broken Zone Wire: Rent a Wire Locator
Irritrol RD-600-INT Alternate Programs B & C Not Running Automatically
Toro ECx Loses Programs A & B—Only Program C Shows
Hunter ICC: All Zones Show 26V Simultaneously—No Water Flow
Diagnosing an 18-Year-Old Hardie Controller with SC Error Codes
KwikDial Battery Symbol Flashing: Internal Memory Failure
Two Zones Dead After Wire Repair? Check Valve Voltage & Water Supply
Irritrol KD-6 Won't Start—Blank Display Recovery
Diagnosing a 'Short' Error on a James Hardie Sprinkler System
Toro Greenkeeper 212: Low Pressure & Wrong Zone Order
Rain Bird RC7BI: 26V at Solenoids But No Operation — Check Diaphragms
Copyright © www.100flowers.win Botanic Garden All Rights Reserved