Question
Hello,

I have a RainBird ESP-6 system and when I turn the dial to auto, the sprinklers go through the stations, but then repeat again. I have set zone 1 for 10 mins to go on at 6:45 am daily. I do have a total of 4 zones, but they have been programmed to not go on. Do you have any suggestions on why the system keeps going and does not turn off?

Answer
Hi Paul

Lets check the programing, you should have only one program active, lets say program A.only one start time 6:45am,all days, zone 1, 10 minutes. Zones 3-4, 0 minutes. All in a custom schedule.

If the problem persists, turn off the power from your home to the controller, take out the battery,wait 10 minutes, re install the battery and turn on the power, reprogram the controller.

If the problem persists the controller get damaged.

Regards
Guillermo