Question
Last night the power died in the middle of our watering cycle.  When the power came back on the system was stuck on the same zone and the clock wasn't running.  We tried checking the fuse and it looked ok.  We've tried turning the power off to it to reset it but to no avail.  Is there some way to reset the system?  any help would be appreciated.  thx Dominik

Answer
Hey Dominik, it sounds like either the fuse is blown, or check your outlet to make sure the 110 volt power is getting to the controller. There is really no way to re-set the controller, once the power comes back on, it should rotate on its own. Make sure the fuse is the right size, it should say on the end of the fuse. I believe it is a 1.5 amp slo-blo. Also try manually turning the big wheel counter clockwise to the next zone, and see if it goes on. If you are getting power to the controller, but it is still not working, it could be one or both of the motors have gone bad. Good luck and have a great day.