Question
I have a Hardie Irragation system. one of the zones is not working. i switch the wire from a working zone to the one that is not working and the non working zone turned on. so its not my box. how do i find the wire that leads to the valve or maybe the wire broke. one end of the wire goes to the box, where does the other end tied too?
Henry

Answer
Hey Henry, the wire runs from the controller, to the automatic valves, and on the valves, there is a solenoid, that the wires hook to. You can rent a wire locator, and you will hook the locator up to the wire at the controller, and this will send a signal through the wire,   that the locator will trace , so that you can follow the wire out to the valves. good luck and have a great day.