Question
I have a Toro EcxTra sprinkler system and it was working fine until last week. The "watering off" symbol is on regardless the position of the dial (run, etc). Of course, sprinkler system is not working. Any suggestions for fixing this problem would be greatly appreciated.

Answer
Hi Gino

F - 揥atering Off?symbol is displayed when the
Rain Delay feature is active.

Set the Rain delay to off.

This feature enables all watering operations to be
delayed from 1 to 7 days. For example, rain is forecast in
your area for the next two days. Instead of turning the
timer off (and possibly forgetting to turn it back on), a
rain delay of 3 days can be easily entered. At the end of
3 days, the timer will resume automatic operation as
scheduled.
Turn the control dial to the RAIN DELAY position.
The rain delay display will begin alternating with the
automatic status display.
To set the number of rain delay days, press the +/ON
or ?OFF button until the desired number (1?) is
flashing.
Return the control dial to the RUN position.
Note: The rain delay number will automatically
decrease as each day passes. When the number
reaches 0 (zero), automatic operation will resume at
the next scheduled start time.
To cancel the rain delay, turn the control dial
momentarily (4 seconds) to the OFF position.

Regards
Guillermo