Question
I mistakenly entered start times for all 5 zones when only the initial start time is required. As a result the controller repeats the watering cycle. How do I remove the four additional start times? Thank you!

Answer
Hello James,

This is a very common thing we see.  All you will need to do is to turn the dial to "Set Watering Start Times" once you are there you will need to use the advance arrows found in the upper right corner to check on the different start times on that program which are found on either side of the + / - buttons. From there you will need to zero out any unwanted start times and turn them off by using the + / - buttons until you get around midnight and once you see OFF then you will know that you turned that start time off.  You will also want to check not just the 4 start times for each program but to check the other programs as well by using the PRG button to advance from one program to another. For example when you are all done you will have Program A with a start time of say 4am and have each zone set for the specific duration desired.