QuestionI was able to identify the whire wire as the ground or common wire in the panel. Because the panel is labeled, I also identified each of the other colors and stations. I connected the color wires and tested each one individually, using the one ground wire. It worked! Now, I want to connect all the solenoids to the ground wire. Do I simply twist them all together with one big wire nut? Thanks Jim.
AnswerHey Barb, you are correct. You can hook them all together with one wire nut. FYI, they do make wire nuts that are considered waterproof (they have a grease inside them). I would recommend using a waterproof connection if possible. Good luck and have a great day.
