Question
I ripped my wiring out of the control box and now i don't know how to get them back in order. I have 4 wires, red, white, green, and blue. Any ideas on how to get them back in order??

Answer
You have to do it systematically.  The white wire is usually the common wire, so you can connect it to that terminal.  If it is not the common, look at your valves, and find out which one wire is connected to all of them.  This will be the common.  Once that is done, turn station one on and begin the process of touching each wire to that terminal until you have the one you want to be #1, and just continue the process.