winterizing through the controller

QuestionHi there, I have a Nelson controller, and after I hooked up the compressor and tried to open the zones through the controller to blow out each zone, the controller flashed a symbol indicating no water supply

rain sensor

QuestionQUESTION: hi just bought a ecxtra toro w wireless rain sensor enb switch 1 switch 2 no or oc ? sensor dont seem to be working ANSWER: Hi Tim With the power to the controller disconnected. The connections

Rainbird timmer

QuestionI installed a four station Hunter timer box and set all the water times,days to water ect... The trimmer clock is programmed to turn on at 5 am and and shut off at 6 am. The trimmer clock will turn on at 5 a

Water pooling removal solutions?

Questionhave a question im hoping you as an expert can help me with. during flood conditions (1+ inch rain in 24 hour period) i have water running to the back left part of my property and pooling there.

Toro TMC 2012 Series

QuestionI am having a problem with a Toro TMC Controller. The unit is about 4 years old and it was working fine until recently. Now the unit will not function at all. The LCD screen is completely blank and the unit

Hardie RJC-FOUR

QuestionWould you know anywhere I might be able to get an old RJC-FOUR controller? Back in 1986 I was contracted to take the RJC-SIX and make a push-button 4-station controller that would use the same micro-controll

GPM needed to connect to city meter

QuestionHi All, A HOAs water is shared with the city of SSF. A city meter was recently installed in SSF and the water shared with the HOA there was cut off. Before the connection to the water supply can

raindial 600

Questionno stations work on auto. when i press manual. zones 1.2.3.individually come on for 4 seconds then switch off.zones 4.5.6. i can here the solenoid valves clicking but no water.I have changed all the solenoid

multi irrigation valves

QuestionWe have just changed our lawn sprinklers to a low flow type which need to be run for a longer period of time. I would like to run three solenoids at a time however I get a voltage error message when I tried

Hardie indoor and outdoor controller

QuestionWe have a James Haradie Irrigation Rain Dial 6, 9 & 12 station indoor & outdoor controller. The system comes on when the function switch is set in off/stop position. Irrigation store where we bou

Rain dial rd-1200

QuestionHello Mr G I replaced a 10yr old rd-1200 with a new one, now that change out is complete it does not run its cycles Automatically only if I run it in manually, front display show time blinking and als

Imperial,10 zone timer.

QuestionJim schaefer; I am trying to locate an operators manual and possibly a schematic for this system we have with this recent house purchase.No model no. available,model name is Valet timer. &n

RainBird RD 600 time clock

QuestionOur time clock is flashing FUS. The Fuse does not appear to be burned out. The time clock is nolonger turning on the sprinklers. What should I do. AnswerHi Daryl, The FUS message means you hav

Issues with several zones not turning on manually

QuestionQUESTION: I have a Toro sprinkler system that has worked for about 10 years. This year when I went to turn it on only two zones worked. So after tring several things I have come to the conclusion that

Richdel 446 PRi not working

QuestionI cant get any of the zones to go on manually, or when programmed. There is power and the zones light up when I select them amnually, but dont come on AnswerHi Jerry Check 1. One or more zone switches are

Hunter Irrigation Controls

QuestionIf I lose power, my irrigation controls reset...being this is the first time Ive turned it on in 2012...I tried to set current date and time and my year choices start at 96 and end in 2011...with no option t

Hardie irrigation

QuestionMy problelm is when I go turn on water it turns the sprinklers right away and countinue to run without changing cycles! AnswerHey Nicolas, when you turn on the water, is the controller on or off? Befo

Hunter EC Controller

QuestionI have a Hunter EC 6 station Indoor controller. All of a sudden valve 1 & 2 does not open. On Auto mode it skips line 1 & 2 and goes to line 3, 4, 5 & 6. I cleaned number 1 & 2 valves and made sure everythin

Backflow preventer gushing water

QuestionHi Jim - When I turned on my sprinkler system this spring, I couldnt get any of the zones to come on. Rather, water just gushes out from under the top housing cover of the backflow preventer. I have good pr

Hunter pro-c all zones open at once

QuestionI printed off the manual and will go back and check some things. I first started with the controller and then went to each valve at the zones. It looks like my back flow is in the front yard in t