QuestionSprinkler system has been working fine. All lights are on, timers set, etc. They have not gone off at the designated times today and in checking the box a code comes up...3 05. Ive checked
RD-900 - System flashes, but not run.
QuestionJim, I have a Rain Dial 900 system that after the winter wont work properly. The system will turn on at the scheduled time, but nothing happens. If I do a manual try, it will start, the time will
QuestionI have a rainbird rc-1260bi controller. The automatic forwarding feature does not work. I can turn the dial to the zone, the zone operates and i can hear the ticking but when it is supposed to advance to the
QuestionMy Hunter SRC Plus Controller has ceased to be reliable after six years of service on the five stations. It will only intermittently operate any one or all of the stations and then only a large amount of bu
QuestionQUESTION: The control box when i go to set watering days in the window it appears as though it says int. im not sure what this means but it will only allow me to schedule one day. ANSWER: Hey Robert, INT st
Nelson smart zone ez low pressure
QuestionJim: moved into older house that has Nelson system with about six zones. All has worked fine until this year I hooked the backflow preventer up and turned all on. I got good pressure through b.p. And control
System is operating only when bleed lines are open
QuestionHi Jim! Thanks in advance for your help. Toro ECX timer 6 zones When starting up the system this year, zone 1 would come on immediately once the water was turned on. The timer was not talking to the valve
QuestionWe have a Hunter Irrigation Control Box. We have it set for one start time for each program (a, b, c). The start time for each program is different. The problem is when I choose to use any
water hamer at backflow preventer
QuestionWhen a cycle is begining or when I manualy turn on a zone (at the controler or the zone valve itself)the watar hammer starts, and it keeps on until I shut it down or I turn off the main supply and turn it on
QuestionController still works. I can hear the clock. However none of the zones come on. Can u help? AnswerHey Marty, check the fuse first and make sure it is not blown. If it is okay, can you tur
Questionhi I have tried to reset my controller to reprogram it and now it seems to be frozen. it jumps over to time/day set but will not allow me to enter any info. what should i do? AnswerHey Cindy, what I w
QuestionHello! I had a rainbird sprinkler system installed a few years ago. Within the past few weeks I have noticed something weird. I had a contractor out to look at it, but he was in a hurry and
GFCI outlets and sprinkler systems
QuestionI have a Hardie system that was installed in the early 90s. Last week an inspector tested the GFCI in the garage by tripping it, and then reset it. This disconnected the power to the unit. The system would n
QuestionIs there a replacement control that will just plug into the hardie hha 11272 AnswerHey Don, I believe this model number is actually called the Rain dial controller. Hardie was bought out by Irri-trol, and I
Questionwe have a rain bird ESP-lxi and the #4 watering station time has symbols in front of it but I cant find an explanation - problem is when on auto it skips from 3-5. During tes #4 goes on. Are these symbols th
replacement digital timer for rainbird 1260BI
Questioni am looking for the most simplest replacement digital timer for my rain bird 1260bi. i currently have 10 zones on a 12 zone system. i would like to do this myself. is it as simple as plug
QuestionModel 446PR sprinkler control - display, after setting everything, shows - 6 then blank spaces then upside down u . ??? Jim AnswerHey Jim, what I would suggest is to take out the battery, and then disconn
Toro hydraulic custom 8 system
QuestionI have a problem, the hydraulic valves are just buried in the yard and not in boxes. I have located 3 of the 8 valves due to leaks, however there is a valve thats stuck open and only one station works regard
QuestionI am having problems with the auto timer on my Rain Bird RC-7bi. The timer will run and keep the current time until it gets to the pushed in pin signifying the start hour, when it gets to this point it
QuestionI have a sprinler system with a Toro TMC-212 controller. A couple of days ago I had the word fuse in the window. The installer came and reset the system. Today it did not start and the window says the code:
Copyright © www.100flowers.win Botanic Garden All Rights Reserved
