QuestionRecently just put a spade through black poly in the flower zone, fixed that problem, went to run the sprinklers through ever zone, all came on but zone 4 stays on throughout, the only way I can shut water of
QuestionI live in north fla. I have had a irrigation well I insalled 10yrs ago I am 30ft.down witha well point I had a leak on the suction pipe check valve corrected the leak now I cant get more than 20 psi water pr
QuestionQUESTION: Was hoping someone could point me in the right direction, I just moved into a new house and found some sprinkler heads in the lawn. There is no timer anywhere just a valve on the side of th house t
bladder tank on well rrigation system
QuestionI had my irrigation system replaced on 7/10. The associated bladder tank was deflated while the installation was completed. When the system was turned on the motor ran but no pressure built up in the b
QuestionI have to run my irrigation off the city water. I need to figure out how many gallons per minute i have in order to figure how many heads i can put on a zone..... Thank you AnswerWilliam, Im very sorry for
QuestionAs you can tell from the age of the controller box, the sprinkler system for the house I purchased last year is a little old. This past week-end I used a valve finder to find all the buried valves and
QuestionI am in the process of deciding on a company to install a system as soon as possible. One sells Toro one sells Hunter. Since Hunter seems to have a corner on the market I have to conclude that they might be
Hunter Pro C pump error message
QuestionHello, I have a 2 year old Hunter system consisting of a Hunter Pro C controller, a Hunter-22 pump start relay (PSR), driving a Berkeley (AO Smith) 2.5 HP 220v pump. System was wotking fine until the other
3 of 5 zones dont work after installing solenoid
QuestionAfter replacing the solenoid for zone 5, the system worked for one watering cycle and hasnt worked since. I was certain that I had reconnected the wires together in the manner in which I found them,
QuestionHey Matt, I have a sprikler zone that has both turf and a rose bed on it. Ive foound that the roses dont need as much water as the turf and are having some dieback as a result. (I have popups for the r
James Hardie controller circa 1993
Questionwhat does MV stand for on the screws that hook up the valve wires? Sometimes the controller will not start the pump, sometimes it will what could the problem be? AnswerMV is the Master Valve. Sometimes call
How to work my irrigation system
QuestionHi, I just bought a new house with a Hydrotek 1000 & Nelson Smart Zone EZ irrigation system. I have no idea how to get it working. Would you be able to tell me how to get our irrigation system working? Than
Dirty water filtration problems!
QuestionHello, weve recently installed a Rainbird irrigation system for our yard. We pump the water directly out of a canal. The water is what youd call dirty...fine silt plus quite a bit of organic matter. We are u
QuestionQUESTION: I have a system with what looks like Hardie 700 series valves in it. Zone one is leaking from the lowest head. It looks like I have the 1.5 valve on zone one. I have found a supplier for parts to r
QuestionI am trying to find out how I can locate the zone valves in my hunter sprinkler system. I read over your answers to see if you already answered this but had no luck. Would you please help me? AnswerGlenn,
Irrigation systems comparisons
QuestionHello Matt We have 2 quotes for a 5 zone sprinkler system for our yard. One is a Hunter and the other is a Rainbird. I know very little about either system as far as which is better etc. One is $1500 dolars
Questioni recently checked a large irrigation system with multiple zones, manually turning each zone on to make sure all sprinkler heads work and spray properly. i got to one zone that i turned on checked and when
QuestionStations 1..3.and 4 operate OK, #2 just fails to go on..any suggestions as to what could be causing this....are there contacts that would have to be cleaned, if so, how??..Thanks for any help...MATT AnswerT
Sprinkler Pump and Check Valve...
QuestionI recently had my sprinkler heads (rotary and spray heads) serviced. The technician at the time told me that my check valve needed replacing, so I replaced it. Roughly a week after the replacemen
QuestionHello, Im working on designing an underground sprinkler system for my front lawn, approx 110 x 100 square of grass. The ground is flat and clear with minimal trees. I want to go with rotary heads
Copyright © www.100flowers.win Botanic Garden All Rights Reserved
